Bio-degradable Graffiti and Shadow Remover

                                      Used primarily on absorbent surfaces.

                                      Exterior and Interior

Removes shadowing left in the substrate following graffiti removal and in special cases also removes paint.

It is formulated for use on -Granite, Slate, Sandstone, Treated Marble, Wood, Glazed brick and surfaces painted with non-organic paint.

Apply by brush to wet surface and leave to act for 2 to 3 minutes until graffiti/shadowing has dissolved.

Wash off with hot water and high pressure (40 - 90°C, 70 - 150 bar/ 1015 - 2175 psi). Adjust pressure to suit surface conditions.

NOTE - For metal surfaces the effectiveness can be reduced if too high a pressure is used. A better result can be achieved if the surface is wiped with a sponge or cloth in the rinsing process. Repeat process if required.

In the event of the surface needing protection against further graffiti attacks following graffiti/shadow removal, it is essential to neutralise the surface first. pH value in the surface material must not be higher than pH9. (Use universal pH meter.)

Dosage Use in concentrate form.

Consumption 0.2 - 0.05 ltr/m2.

Guidelines Supplied in 5 ltr plastic containers. Yellow-Brown colour.

Precautions Special caution must be taken as this is a corrosive product.

Storage Store in dark, frost free conditions in closed original container.

Shelf life Approximately 24 months in unopened container.

Dangerous Goods - ADR Class 8, label 8, Item number 42(B).

Applicator of product shall carry out testing and be responsible for the result.